SPEC NO: DSAF2639 REV NO: V.4B DATE: JAN/26/2013 PAGE: 2 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101030819
Selection Guide
Absolute Maximum Ratings at TA=25癈
Electrical / Optical Characteristics at TA=25癈
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Part No.
Dice
Lens Type
Iv (mcd) [2]
@ 20mA
iewing
Angle [1]
Min.
Typ.
2?/2
WP115WGYW
Green (GaP)
White Diffused
15
40
Yellow (GaAsP/GaP)
10
20
60?/SPAN>
Symbol
Parameter
Device
Typ.
Max.
Units
Test Conditions
籶eak
Peak Wavelength
Green
Yellow
565
590
nm
IF=20mA
籇 [1]
Dominant Wavelength
Green
Yellow
568
588
nm
IF=20mA
敾1/2
Spectral Line Half-width
Green
Yellow
30
35
nm
IF=20mA
C
Capacitance
Green
Yellow
15
20
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Green
Yellow
2.2
2.1
2.5
2.5
V
IF=20mA
IR
Reverse Current
Green
Yellow
10
10
uA
VR = 5V
Parameter
Green
Yellow
Units
Power dissipation
62.5
75
mW
DC Forward Current
25
30
mA
Peak Forward Current [1]
140
140
mA
Reverse Voltage
V
Operating / Storage Temperature
-40癈 To +85癈
Lead Solder Temperature [2]
260癈 For 3 Seconds
Lead Solder Temperature [3]
260癈 For 5 Seconds
5
Notes:
1. ?/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.